While the default options are recommended for the majority of users, CloudM Migrate gives users the ability to customise their migration experience. The following are the advanced options available to those migrating to G Suite.
- Migration Base URL 1.0 - The base URL for email migration using v1 of the email migration API. This should only be changed for specialized migration scenarios and for normal migrations should not be altered.
- Migration Base URL 2.0 - The base URL for email migration using v2 of the email migration API. This should only be changed for specialized migration scenarios and for normal migrations should not be altered.
- Timeout - The time in milliseconds that the tool has to complete sending a transaction to Google before an error occurs. This should be set high enough so that large amounts of data can be sent (further description is available in ‘Migration Strategies’). If a transaction fails using the provided timeout, it will be re-attempted using a larger timeout. While errors occur this will continue with increasing lengths of timeout, up to the retry count. It is better to set this to a very high value to ensure requests get through.
- Maximum Batch Size - This is the maximum size, in bytes, of a single transaction with the Google servers. Note: The absolute maximum size of any transaction that Google Apps allows is 32MB. Because of the way that messages are created and encoded (XML OR JSON, which is then Base 64 encoded) it is not usually possible to know the exact size of a message until it is created. Messages can be sent in batches, which also make it more difficult to establish the exact size of each transaction. Large batches also increase memory usage significantly and it is recommended that the maximum value of 5MB is used. This setting also has an impact on how long a single message will take to transmit to Google Apps and can therefore affect the requirements for the Timeout setting.
- Maximum Batch Count - The number of items that will be sent in a batch when transferring contacts and calendar items.
- Retry Count - The number of times a transaction with the Google servers will be retried if it fails. Note: A transaction could fail for one of a few reasons. If the transport layer fails, that is a transaction could not get through to the Google servers or the transaction times out, then the transaction will be attempted again until the retry count is met – with an increasing timeout value each time. Another possible reason for failure is that the client is sending too many requests per second. In this case, an exponential backoff system is employed where the tool waits for a period before retying any failed transactions (or parts of transactions).
- Modify Request - Leave at the default unless instructed by support.
- Custom Parameters - Adds custom headers to Google API requests, for debugging only.
- Force Appointment Acceptance - Set this to true to force all appointment recipients' attendance as confirmed.
- Appointment Privacy - Set the visibility of all appointments. Original will use the privacy setting from the source system, while the other settings will override the original setting and set the specified visibility.
- Maximum Attendees - Set the maximum number of attendees for any migrated appointments.
- Default Calendar Timezone - Set the default calendar timezone to use for recurring appointments which have no timezone set in the source system and where the target Google calendar is in UTC.
- Send Individual Events - Send appointment events as individual items rather than as a batch. Performance is slower than in batches, but may help with some rare issues with rate limiting.
- Color Categorized Appointments - If the appointment had a category in the source system, apply a colour to all appointments of that category.
- Migrate Attachments - Migrate appointment attachments to Google Drive and share with attendee.
- Appointment Attachment Document Sharing - When migrating appointment attachments to Drive, choose whether the attachment should be shared with the appointment attendees.
Document Options (File and Attachments)
- Convert Text - Where possible, convert text and word documents to the Google Documents format.
- Convert Spreadsheets - Where possible, convert spreadsheets to the Google Documents format.
- Convert Presentations - Where possible, convert presentations to the Google Documents format.
- Convert Drawings - Where possible, convert drawings (*.wmf) to the Google Documents format.
- Convert OCR - Where possible, convert images using OCR.
- Archive Inbox EMail - Do not place migrated email from the inbox into the inbox within Google Apps. Instead the email will have a label of 'Migrated Email' applied.
- Apply Inbox Label to Sub-Folders - When a message from the source system was in a folder in the inbox, create the message with both 'Inbox' and 'Folder Name' labels. Set to False to just create the folder label.
- Modify Sent Address - For sent messages, if the sender does not match the email address of the destination account, modify it to match. This is to allow for sent items to display correctly in the Google Apps interface. Default is true.
- Maximum Batch Count - Specify the maximum number of messages in a single batch. Specify 0 to let the tool automatically allocate batches. Only applicable for immediate migrations.
- Email Transfer Delay - Specify the number of milliseconds to wait between sending messages.
- Email Thread Count - Specify the number of milliseconds to wait between sending messages
- Use Limited Scopes - Use Limited Scopes requires the following scopes to be enabled : 'https://www.googleapis.com/auth/gmail.labels' and 'https://www.googleapis.com/auth/gmail.insert'.
- Collection Naming Scheme - When attachments or files are migrated to Google Drive, choose the collection label scheme that will be applied to the migrated documents.
- Folder Name and Collection Label - migrate documents into a collection based on the folder name the attachment or document originated from, and also apply the collection label specified in 'Collection Name'.
- Folder Name - Migrate documents into a collection based on the folder name the attachment or document originated from.
- Collection Label - Migrate documents into a collection specified by 'Collection Name'.
- None - Do not apply a collection label.
- Collection Label - Specify the name of the collection label that will be used when 'Collection Label Scheme' specifies that a collection label should be applied to migrated documents.
- Use Cached Item Mappings - Use cached item mappings when migrating to Drive. (Not applicable for Google to Google migrations).
- Preserve Modified Date - Attempt to preserve the modified date during a migration.
- Allow Non-Google Sharing - Allow permissions to be added for users without Google accounts by sending notification emails to those users. Note this can result in many emails being sent to any non-Google addresses.
- Maximum Results Per Request - The limit on the number of results returned when listing files using the Google Drive API.
- Batch Permissions - Use batching to provide faster, but more error prone, Google Drive migrations.
Shared Drive Options
- Shared Drive File Permissions - When adding permissions to files within Shared Drives choose where these permissions will be applied. Choose from 'File' (the default), 'Root' (where all permissions will be applied on the Shared Drive itself and thus inherited down the whole tree) or 'None' (no permissions will be applied)
- Shared Drive Folder Permissions - Shared Drive folders cannot directly have permissions. Choose whether to apply permissions that apply to folders from the source at the root of the Shared Drive, or not at all.
- Shared Drive Same Domain Migration Type - When migrating from a Google Drive folder into a Shared Drive choose whether to copy the files, or to move them. Note in the case of a move, the skeleton folder structure of the source folder will remain.
- Write Shared Drive Permissions CSV - Write a CSV file describing the permissions that were applied, or would be applied when migrating to Shared Drive.
- Migrate Shared Drive Members - Migrate Shared Drive members when migrating a Shared Drive to Shared Drive.
- Shared Drive Default Organizers - Optionally, specify a list of existing user email addresses that will be assigned as organizers to Shared Drives being migrated to. These organizer accounts will then be used to improve the performance of the migration. In the default case the G Suite admin user account will be used to perform the migration to Shared Drives, but specifying multiple users here improves throughput by utilizing multiple organizer accounts simultaneously.
- Remove Shared Drive Default Organizers - Remove the Shared Drive Default Organizers specified in 'Shared Drive Default Organizers' field.
- Check Users/Resources/Groups Exist - Set this to false if you do not want to check if users, groups or resources exist in Google Apps (useful for testing exporting without creating accounts in Google Apps).
- Create Users/Resources/Groups/Shared Drives - If users, groups or resources (supported source systems only) are not present within the Google domain, create them. If users have not been pre-created within the Google system then this can be set to true to have the migration tool create the users. If the users have not been pre-created and this is set to false then the migration process will fail. Note: Setting this to true requires that the Admin SDK is enabled for the Google domain and also that all details are provided for each user, including name, given name, family name and password. Failing to provide any of these details will cause the creation process to fail for that user. It is generally recommended that users are pre-created in the Google domain before processing with the tool. For resources and groups, only the Resource/Group Name (and Import/Export Names) are required.
- Check Services Enabled - When running the 'Check Users' action, also check if the selected Google services for that user are enabled.
- Change Password On Login - Force users to change their password on next login.
- Migrate to 'My Contacts' - Migrate personal contacts to the 'My Contacts' group rather than only to 'All Contacts'.
- Send Individual Contacts - This should generally be left to true, while slower than batch importing its much more reliable.
- Explode Message Labels - By default, if an email message is contained within a folder structure the label applied to that message will be the same as the folder structure (e.g. 'Personal Folders/My Folder/My Other Folder'). Setting this option to true will create a label for each of the folders (e.g. for the case described, labels of 'Personal Folders', 'My Folder' and 'My Other Folder' will be applied).
- Create Sub Labels - Create all sub-labels for labels within a message. For example, if a message has the label 'toplevel/midlevel', create both 'toplevel' and 'toplevel/midlevel' labels. This is specifically designed for use with nested labels.
- Multi-Server Drive Migration - Use distributed locking to allow for Drive migrations to be performed from multiple servers. This can be disabled if using only one server for migration.
- Drive Locks from Listed Users - Use only users from the user list to obtain locks for Drive files when migrating in multi-server configurations. You must always perform migrations with the same user list at any one time to use this option or duplicate items will be migrated.